Gateway - Setup - Ubee DDW2600 Subscriber User Manual

4.2.2 Gateway - Setup

4.2.2
The Setup option allows you to make key network configurations to the device.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Setup from the left side of the screen. The Setup fields are explained
following this screen example.
Label
28
Gateway - Setup
LAN IP Address
MAC Address
WAN IP Address
WAN MAC Address
Duration
Expires
Release WAN Lease
Renew WAN Lease
Refresh
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
Defines the local IP address, which will be the default
gateway address for all wired LAN hosts that connect to
the cable modem.
Displays the LAN interface's hardware address.
Displays the current WAN public IP address that is
obtained from the service provider.
Displays the WAN interface's hardware address.
Displays the accumulated time since successfully acquiring
a WAN public IP address.
Displays the remaining time before the expiration of the
WAN IP address, if applicable.
Click to release the WAN public IP address.
Click to renew the WAN IP address.
Click to refresh the status of this page.
Ubee Interactive