User Manual - Ubee DDW2600 Subscriber User Manual

4.2.11 Advanced Gateway Setup - Forwarding
 For additional information, consult your host device's or specific application's
Label
42

user manual.

Index
Local IP
Internal Port
Public Interface IP
Ext. Start Port
Ext. End Port
Protocol
Enabled
Apply
Port Map
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Description
Displays the Index number of the rule.
Enter the last digits of the IP address of the server for which to
setup the forwarding rule.
Enter the port number listened to by the server host located in
your LAN.
Normally, this field is not modified unless you wish to designate
another router on the network to forward data through.
Define the port number to start the range of ports to publish to
the Internet.
Define the port number to end the range of ports published to
Internet.
Note: Be very careful with ranges. Ports within a range will not
be usable by other applications that may require them. It is
common and safer to enter the same port number as the start
and end of the range.
Select the protocol type, UDP, TCPIP, or Both.
Select to enable this rule.
Click to save.
Click to show a list of common applications and their ports.
Ubee Interactive