4.6.2 Firewall - Event Log
4.6.2
The Event Log option allows you to configure firewall event log reporting via email
alerts and report on possible attacks on the system.
1. Access the web interface. Refer to
2. Click the Firewall link from the top of the screen.
3. Click Event Log from the left side of the screen. The Event Log fields are
explained following this screen example.
4. Enter the appropriate email address and password information, enter the SMTP
server, then click the Enable button. Click Apply to complete the setup. The
entered email address will begin to receive firewall events.
4.6.3
The Remote Log option allows you to configure events to be sent to a local SysLog
server.
1. Access the web interface. Refer to
2. Click the Firewall link from the top of the screen.
3. Click Remote Log from the left side of the screen. The Remote Log fields are
explained following this screen example.
78
Firewall - Event Log
Firewall - Remote Log
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page
14, if needed.
page
14, if needed.
Ubee Interactive