Modem - Status - Ubee DDW2600 Subscriber User Manual

4.1.2 Modem - Status

Label
Boot Code Version
Software Version
Hardware Version
CA Key
4.1.2
This section explains how to use the Status screen of the web interface. This is a
read-only screen and it displays the device's general connection information.
1. Access the web interface. Refer to
2. Click the Modem link from the top menu and then the Status link from the left side
of the screen. Field explanations are listed below the following screen example.
Label
Acquire
Downstream
Channel
Connectivity State
Boot State
Security
20
Description
The boot software code version of the device.
The general software version of the device.
The internal version number that identifies the hardware design.
The device installs a Certificate Authority (CA) key that is transferred
from the service provider's server after the cable modem is
authenticated. The key is used to secure communication between
the service provider and the cable modem.
Modem - Status
Description
Displays a Downstream channel that the cable modem is trying to
lock to and the progress.
After initialization, the cable modem is configured by a DHCP server
to obtain an IP address. Once successful, the cable modem is
Online. The Status column shows the progress and status
(Online/Offline). The Comments column displays the reason why
cable modem's connectivity state is not Online.
Shows the registration status of the device.
If BPI is enabled, the status will displays Enabled.
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Ubee Interactive