Wireless - Access Control - Ubee DDW2600 Subscriber User Manual

Ubee Interactive
4.3.3
The Access Control option allows you to configure what clients can access your
wireless network.
1. Access the web interface. Refer to
2. Click the Wireless link from the top of the screen.
3. Click Access Control from the left side of the screen. The Access Control fields
are explained following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010

Wireless - Access Control

MAC Restrict Mode
MAC Addresses
Apply
page 14, if needed.
Description
Use this feature to control wireless access to your network by
MAC address.
Select Disable to turn off MAC Restrictions and allow any
wireless client to connect to this wireless router. Note, however,
if you use other security mechanisms for access to the wireless
network, clients must still adhere to those restrictions.
Select Allow to create a list of wireless clients that can connect
to the wireless network. Enter the MAC Addresses of these
clients in the MAC Addresses fields. All MAC addresses not on
the list will not be allowed access to your wireless network.
Select Deny to create a list of wireless clients that you do not
want to have access to your wireless network. Enter the MAC
Addresses of these clients in the MAC Addresses fields.
Input the MAC addresses. You may consider cutting and
pasting MAC addresses from the connected clients list at the
bottom of the screen.
Click to save.
4.3.3 Wireless - Access Control
55