Parental Control - Basic Settings - Ubee DDW2600 Subscriber User Manual

Ubee Interactive
4.5.2
The Basic option allows basic selection of rules which block certain Internet content
and certain Web sites. When you change your Parental Control settings, you must
click on the appropriate "Apply," "Add," or "Remove" button for your new settings to
take effect. Refresh your browser's display to see the currently active settings.
1. Access the web interface. Refer to
2. Click the Parental Control link from the top of the screen.
3. Click Basic from the left side of the screen. The Basic fields are explained
following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010

Parental Control - Basic Settings

Enable Parental Control
Apply
Content Policy
Configuration
Add New Policy
Content Policy
List/Remove Policy
page 14, if needed.
Description
Click the Enable checkbox to activate the Parental Control
feature.
Click to save all changes in the screen and activate Parental
Control, if enabled.
This part of the screen allows you to configure the internet
content access policy.
Enter a policy name and click Add New Policy to create a new
policy.
Select from the list an existing policy to edit or remove. If
removing a policy, select it from the list and click the Remove
Policy button.
4.5.2 Parental Control - Basic Settings
73