Device Back Panel Description; Ddw2600 And Ddc2700 Back Panel Images - Ubee DDW2600 Subscriber User Manual

Ubee Interactive
2.6

Device Back Panel Description

Review the images below and the descriptions that follow for an explanation of the
device back panel.
2.6.1
DDW2600
DDC2700
Back Panel Item/Number
1 - Power Inlet
2 - Reset
3 - Ethernet 1 to 4 Ports
4 - USB Port
5 - Cable Port
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010

DDW2600 and DDC2700 Back Panel Images

Description
The reset switch restores the default settings of the device
including wireless (DDW2600 only) and custom gateway
settings. Use a pointed object to push down on the reset button
for 5 seconds (until power LED turns off). After the power LED
turns off, release the button.
These four RJ45 Ethernet ports are used to connect Ethernet
devices, such as computers and gaming consoles, to the
internet.
Using the USB cable included in the product package,
subscribers can connect a device to the network using this port,
as long as the device also has a USB port. This may be useful
for devices that do not have an ethernet network adapter/port.
The Cable port is where the device connects to the cable wall
outlet, or a cable splitter connected to the wall outlet.
The power inlet is used for connecting the device's
power adapter to the device. WARNING: Use only
the power adapter shipped with this device. Failure to
do so may cause damage to the device.
2.6 Device Back Panel Description
9