Ubee Interactive
4.7.6
The User Defaults option allows you to restore some factory defaults to the system,
including Firewall and Parental Control settings.
1. Access the web interface. Refer to
2. Click the Tools link from the top of the screen.
3. Click User Default from the left side of the screen. The User Default options are
explained following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Tools - User Defaults
Restore Defaults
Reset The system
Apply
page
14, if needed.
Description
Select Yes to restore the device to default settings for the
Firewall and Parental Control settings. This operation does not
require a reset of the system.
Select Yes to power cycle and reset the device.
Click Apply to complete the options selected in this screen.
4.7.6 Tools - User Defaults
85