Gateway - Time - Ubee DDW2600 Subscriber User Manual

4.2.6 Gateway - Time

4.2.6
The Time option allows you to configure the system time obtained from network
servers via Simple Network Time Protocol (SNTP). The device must be reset for any
changes to take effect.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Time from the left side of the screen. The Time fields are explained following
this screen example.
Label
34
Gateway - Time
Enable SNTP
Current Time
System Start Time
Time Server 1
Time Server 2
Time Server 3
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
Click Yes to enable SNTP (Network Time Protocol). Click No
to disable the feature. SNTP is a protocol for synchronizing
the clocks of computing devices over networks.
Displays the current system time.
Displays the accumulated time since system was started.
Defines the Time server IP address or Domain name. Use the
one provided, or enter an alternative choice.
Defines the Time server IP address or Domain name. Use the
one provided, or enter an alternative choice.
Defines the Time server IP address or Domain name. Use the
one provided, or enter an alternative choice.
Ubee Interactive