Table of Contents
Advertisement
3
Install the Device
This chapter explains how to install the DDW2600 wireless cable modem/router or the
DDM2700 commercial cable modem/router.
3.1
Connect the Device and Access the Web Interface
Use the instructions in this section to connect the device and access the web user
interface to configure initial settings.
3.1.1
Complete the following steps to connect the DDW2600 wireless cable modem/router
or the DDM2700 commercial cable modem/router.
1. Important: Subscribers must contact their service provider to enable internet
access. Typically, the service provider initially connects and configures the device.
These steps are also provided below. If you wish to confirm the setup, or add
devices to your network, refer to Confirm Installation and Connect Devices to the
Network, on
2. Remove all contents from the device packaging. Place the DDW2600 or DDM2700
in an optimal location for connection to other devices, such as PCs or gaming
consoles. Keep the following in mind:
For the DDW2600 Wireless Cable Modem Only: Keep the wireless cable
For the DDW2600 and DDM2700: Place the device in a location that has an
3. Have a PC available and powered on. The PC must have an Ethernet network
adapter/Ethernet port. The PC must also have an internet browser installed (for
example, Netscape or Internet Explorer). The following are supported:
For Windows 2000, XP, Vista: Firefox 1.07 and higher, Internet Explorer v7 and
For MAC OS X, 10.2, and higher: Firefox 1.07 and higher, Safari 1.x and higher
4. Connect the power adapter that is included with the product package to the cable
modem and to the power outlet.
5. Connect one end of a network cable (supplied in the product package) to your
computer's Ethernet port. Connect the other end to one of the Ethernet ports (for
example, Ethernet 1) on the cable modem.
6. Connect a coaxial cable from the Cable port on the device to the cable wall outlet.
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Connect the Device
page
16.
modem and wireless clients in open areas or far away from transformers,
heavy-duty motors, microwave ovens, refrigerators, fluorescent lights, and
other manufacturing equipment. These items can impact wireless signals. A
wireless signal may become weaker after it has passed through metal,
concrete, brick, walls, or floors.
operating temperature of 0˚C to 40˚C (32˚F to 104˚F). Refer to
safety information.
above, Netscape
page 1
for more
13
Hide quick links:
Advertisement
Table of Contents
