4.2.8 Advanced Gateway Setup - Mac Filtering
4.2.8
The MAC Filtering option allows you to filter MAC addresses in order to block internet
traffic from specific network devices on the LAN. This filtering establishes a black list.
Any host listed on this list will not be able to access the network/internet through the
cable modem.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click MAC Filtering from the left side of the screen. The MAC Filtering fields are
explained following this screen example.
Label
4.2.9
The IP Filtering option allows you to filter IP addresses in order to block internet
traffic to specific network devices on the LAN. Any host listed on this list will not be
accessible to internet traffic.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
38
Advanced Gateway Setup - Mac Filtering
Index
MAC Address
Clear
View Additional Rules:
Apply
Advanced Gateway Setup - IP Filtering
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page
14, if needed.
Description
The Index number of the rule.
Enter the MAC address to block.
Select Clear to delete the filtering rule.
Select from the pull-down to display the remaining 10 rules, if
they exist. 20 rules total are supported.
Click Apply to save all screen changes.
page
14, if needed.
Ubee Interactive