Installing The Modem Using Wireless - Ubee DDW2600 User Manual

3
3. Installing the Modem Using
Wireless
This chapter explains the process for installing your wireless cable modem using the
wireless feature. First you will install the hardware (wireless cable modem, wireless client
(not included), coax cable (not included), and power adapter).
Installing the Hardware
This section explains how to connect the wireless cable modem to the computer, wall
cable outlet, and electrical outlet. To install the hardware:
Power off the computer
Connect one end of the coaxial cable to the wireless cable modem
connector. Connect the other end of the coaxial cable to the cable wall
outlet. Be sure not to bend or over tighten the cables as this may strain the
connector and cause damage. If you plan to connect the wireless cable
modem and television to the same wall outlet, you must use a cable line
splitter (not included).
Plug the wireless cable modem
'
modem s power jack and into an electrical outlet or surge protector.
Follow the installation and configuration instructions included with your
wireless client.
You are now ready to use your cable modem.
Troubleshooting the Wireless Installation
The WLAN LED is not lit.
Verify that your Wireless PC Card or Wireless USB client is properly
connected to your computer.
DDW2600/DDC2700

Installing the Modem Using Wireless

'
s power adapter into the wireless cable
'
s cable