Ubee Interactive
4.7.4
The Scanning Plan option allows you to define a specific range of frequency for the
cable modem to scan and use.
1. Access the web interface. Refer to
2. Click the Tools link from the top of the screen.
3. Click Scanning Plan from the left side of the screen. The Scanning Plan fields
are explained following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Tools - Scanning Plan
Lowest Center
Frequency
Highest Center
Frequency
Channel Spacing
page
14, if needed.
Description
Lowest and Highest Center Frequency are used to define a
scope for the frequencies used by the cable modem. Enter the
low end of the frequency range.
Enter the high end of the frequency range.
Channel spacing is set for the width of the frequency spectrum
to scan whenever the cable modem scans. If it is 6000000, for
example, when scanning from 9300000, the cable modem will
scan from 93000000 to 99000000, then from 99000000 to
105000000, and so on until the Highest Center Frequency is
reached.
4.7.4 Tools - Scanning Plan
83