Advanced Gateway Setup - Port Filtering - Ubee DDW2600 Subscriber User Manual

Ubee Interactive
3. Click IP Filtering from the left side of the screen. The IP Filtering fields are
explained following this screen example.
Label
4.2.10
The Port Filtering option allows you to configure port filters in order to block specific
internet services on specific ports to all devices on the LAN.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Port Filtering from the left side of the screen. The Port Filtering fields are
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Start Address
End Address
Enabled
Apply

Advanced Gateway Setup - Port Filtering

Description
Enter the start IP address.
Enter the end IP address.
Select Enabled to activate the rule.
Click Apply to save all screen changes.
page 14, if needed.
4.2.10 Advanced Gateway Setup - Port Filtering
39