Advanced Gateway Setup - Port Triggering - Ubee DDW2600 Subscriber User Manual

4.2.13 Advanced Gateway Setup - Port Triggering

4.2.13
The Port Triggering option allows you to configure dynamic triggers to specific devices
on the LAN. This allows for special applications that require specific port numbers with
bi-directional traffic to function properly. Applications such as video conferencing,
voice, gaming, and some messaging program features may require these special
settings. Refer to
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Port Triggering from the left side of the screen. The Port Triggering fields
are explained following this screen example.
Label
44
Advanced Gateway Setup - Port Triggering
page 46 for more information on how to setup Port Triggering.
Trigger Range
Start Port
End Port
Target Range
Start Port
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
The trigger port is a port (or a range of ports) that triggers the
router to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
Enter a port number or the starting port number in a range of
port numbers.
Enter a port number or the ending port number in a range of
port numbers.
Target Range is a port (or a range of ports) that a server on the
WAN uses when it responds to service requests. The router
forwards the traffic with this port (or range of ports) to the client
computer on the LAN that requested the service
Enter a port number or the starting port number in a range of
port numbers.
Ubee Interactive