Modem - Operation Config; Event Log - Ubee DDW2600 Subscriber User Manual

4.1.6 Modem - Operation Config

4.1.6
This section explains how to use the Operation Config screen of the web interface.
The Operation Config screen displays general information on the device's active
operational capabilities.
1. Access the web interface. Refer to
2. Click the Modem link from the top menu and then the Operation Config link from
the left side of the screen. Field explanations are listed below the following screen
example.
Label
Network Access
Maximum Downstream Data
Rate
Maximum Upstream Data
Rate
Maximum Upstream
Channel Burst
Maximum Number of CPEs
Modem Capability
4.1.7
This section explains how to use the Event Log screen of the web interface. The
Event Log screen displays log information that may be useful to diagnose operational
issues with the device.
1. Access the web interface. Refer to
2. Click the Event Log link from the left side of the screen. Field explanations are
24
Modem - Operation Config
Description
Displays the status of cable modem, Denied means no
connectivity is established. Allowed means connectivity is
established to Internet.
Displays the maximum downstream data rate.
Displays the maximum upstream data rate.
Displays the maximum upstream Channel burst
Displays the maximum number of Ethernet devices that
can be connected (LAN side) to access the
network/internet at the same time.
Displays device attributes that indicate aspects of its
throughput and latency.

Event Log

DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Allowed
page 14, if needed.
Ubee Interactive