Gateway - Dhcp - Ubee DDW2600 Subscriber User Manual

4.2.3 Gateway - DHCP

4.2.3
The DHCP option allows you to configure DHCP server-specific behavior on the
device.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click DHCP from the left side of the screen. The DHCP fields are explained
following this screen example.
Label
30
Gateway - DHCP
DHCP Server
Private Starting Address
Number of CPEs
Public Starting Address
Number of CPEs
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
Select Yes to enable or No to disable the DHCP server on
the device. If No is selected, all of the static DHCP rules in
this screen are ignored.
Define the starting private IP address for the pool of IP
addresses that may be used by connecting clients. Private
addresses are translated to public IPs in order to be used
on the network.
Define the maximum number of Customer Premises
equipment (CPE) that can connect to the network, via the
cable modem using private IP addresses. This number
determines the end of the private IP address range started
above.
Define the starting public IP address. Public addresses can
be recognized on the network.
Define the maximum number of Customer Premises
equipment (CPE) that can connect to the network, via the
cable modem. This number determines the end of the
public IP address range started above.
Ubee Interactive