Gateway - Dhcp Static Lease - Ubee DDW2600 Subscriber User Manual

4.2.4 Gateway - DHCP Static Lease

4.2.4
The Static Lease option allows you to assign static IP addresses to clients on your
network using the IP addresses acquired through the DHCP server on the cable
modem.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Static Lease from the left side of the screen. The Static Lease fields are
explained following this screen example.
Label
32
Gateway - DHCP Static Lease
Index
MAC Address
IP Address
Enabled
Clear
Apply
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
Index number of the each client that connects to your network.
This field is populated with the MAC address of the client that
you may want to assign a static IP address to.
Enter a specific IP address to assign to the specific client/host.
Click Enabled to activate this rule.
Click Clear to delete the rule.
Click Apply to save all screen changes.
Ubee Interactive