Tools - Trace Route - Ubee DDW2600 Subscriber User Manual

Ubee Interactive
4.7.2
The Trace Route option is a utility to test the route that data is taking to and from the
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router.
1. Access the web interface. Refer to
2. Click the Tools link from the top of the screen.
3. Click Trace Route from the left side of the screen. The Trace Route fields are
explained following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Ping Interval
Start Test/Abort
Test/Clear Results
Results/Refresh

Tools - Trace Route

Tracert Target
MAX Hops
Define the interval between ping operations in milliseconds.
Click Start to start the ping test. Click Abort Test to cancel the
ping test. Click Clear Results to clear the displayed ping
results.
The Results area of the screen displays the ping results. Click
Refresh to update the screen with on-going ping tests.
page 14, if needed.
Description
Enter the specific IP address or domain (e.g. yahoo.com) to
which you want to trace a route.
Define the MAX hops. Hops is the number routers that the trace
route traverses.
4.7.2 Tools - Trace Route
81