Modem - Upstream - Ubee DDW2600 Subscriber User Manual

4.1.4 Modem - Upstream

4.1.4
This section explains how to use the Upstream screen of the web interface. The
Upstream screen displays detailed information on the device's connection to
upstream channels to the service provider.
1. Access the web interface. Refer to
2. Click the Modem link from the top menu and then the Upstream link from the left
side of the screen. Field explanations are listed below the following screen
example.
Label
Upstream Lock
Upstream Channel ID
Upstream Frequency
Upstream Modulation
Upstream Symbol Rate
Upstream Transmit Power
Level
Upstream Mini-Slot Size
Refresh
22
Modem - Upstream
Description
Current cable modem upstream lock status (Locked/Not
Locked).
Displays the current cable modem upstream channel ID.
Displays the current cable modem upstream frequency
(Hz).
Displays the current cable modem upstream modulation
type (QPSK/ QAM8 /QAM16/ QAM32/ QAM64/ QAM128/
QAM256).
Displays the symbol rate (Ksym/sec).
Displays the current cable modem upstream transmit
power (dBmV).
Displays the current cable modem upstream mini-slot size
in Timebase Ticks of 6.25.
Click this button to refresh the active screen data.
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Ubee Interactive