Vpn - Summary - Ubee DDW2600 Subscriber User Manual

4.4.2 VPN - Summary

4.4.2
The Summary option allows you to configure VPN tunnels with a centralized view.
1. Access the web interface. Refer to
2. Click the VPN link from the top of the screen.
3. Click Summary from the left side of the screen. The Summary fields are
explained following this screen example.
Label
62
VPN - Summary
L2TP Server
PPTP Server
Configure
IPSec End Point
#
Name
Status
Control
Configure
Add New Tunnel
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
page 14, if needed.
Description
Select Disabled or Enabled to enable a Layer 2 Tunneling
Protocol (L2TP) VPN. Refer to
Select Disabled or Enabled to enable a Point to Point Tunneling
Protocol (PPTP) VPN. Refer to
Click Configure to activate the VPN. Refer to
information.
Select to Enable or Disable the IPSec VPN service.
ID of the IPSec VPN tunnel.
Displays the name of IPSec VPN tunnels.
Once an IPSec VPN connects successfully, the Status is
Connected. Otherwise, it is Not Connected.
Displays when the user manually triggers an IPSec VPN
connection request to the remote VPN gateway.
Click Edit to modify IPSec VPN parameters of this tunnel;
Click Delete to delete this IPSec VPN tunnel.
Click to quickly create a new IPSec VPN tunnel, and then to
modify its parameters.
page 68 for more information.
page 68 for more information.
page 68 for more
Ubee Interactive