Care And Maintenance Instructions - Vision Fitness X20 Service Manual

3.3 carE anD MaintEnancE inStrUctionS

In order to maximize life span, and minimize down time, all Vision
Fitness equipment requires regular cleaning, and maintenance items
performed on a scheduled basis. this section contains detailed
instructions on how to perform these items and the frequency of
which they should be done. Some basic tools and supplies will be
necessary to perform these tasks which include (but may not be
limited to):
* Metric Allen wrenches
* #2 Phillips head screwdriver
* Adjustable wrench
* lint free cleaning cloths
* teflon based spray lubricant such as "Super lube" or other Vision
Fitness approved products.
* Mild water soluble detergent such as "Simple Green" or other
Vision Fitness approved products
* Vacuum cleaner with an extendable hose and crevasse tool
attachment.
Daily MaintEnancE itEMS
1) look and listen for loose fasteners, unusual noises, and any
other indications that the equipment may be in need of service.
2) Clean the elliptical trainer before and after each use, including:
a. Use a damp, soft cloth with water or mild liquid detergent to
clean all exposed surfaces. Do not use ammonia, chlorine, or any
acid based cleaners.
b. Keep the console display free of fingerprints and salt build
up caused by sweat.
c. Frequently vacuum the floor beneath the unit to prevent the
accumulation of dust and dirt which can affect the smooth operation
of the unit.
MontHly MaintEnancE itEMS
1) Inspect the console, grips, pedals, and shrouds for damage.
2) Adjust leveling feet if equipment rocks or wobbles.
3) Inspect the hardware on the frame for tightness. tighten if
necessary.
6
cHaptEr 3: prEVEntatiVE MaintEnancE
qUartErly MaintEnancE itEMS
1) Inspect the console mounting bolts for tightness, tighten if
necessary.
2) Inspect the console, grips, and handlebar for damage.
3) remove the side covers and inspect the grooves on the belts
and pulleys for dust or dirt. Clean if necessary (Figures A-C).
figUrE a
figUrE c
figUrE b