7.7 pEDal arM rEplacEMEnt
1) remove the 2 screws holding on the front pedal arm covers and remove them (Figures A & B). NOTE: the pedal arm top and bottom
covers are snapped together and will need to be pulled apart.
figUrE a
2) remove the bolt / nut holding the pedal arm to the crank (Figure C).
3) remove the screw holding the pedal arm to the link arm (Figure D).
4) the pedal arm can now be removed.
figUrE c
5) reverse Steps 1-4 to install a new pedal arm.
38
cHaptEr 7: part rEplacEMEnt gUiDE
figUrE b
figUrE D