Troubleshooting - Console Power Issues - Vision Fitness X20 Service Manual

cHaptEr 6: troUblESHooting

6.5 troUblESHooting - conSolE poWEr iSSUES

no DiSplay on tHE conSolE
poSSiblE caUSES:
1) the power switch on the back of the console is not in the on position.
2) the power adaptor is not plugged into the base of the elliptical trainer.
3) the wire harness is not plugged into the back of the console.
SolUtion
1) turn the power switch on the back of the console to on.
2) Plug the power adaptor into the base of the elliptical trainer.
3) remove the 4 screws holding the console to the console mast.
a. Plug the wire harness into the back of the console.
27