7.2 HEart ratE gripS rEplacEMEnt
1) Use a flat screwdriver to remove the 2 silver plates of the hr grip (Figures A & B). the plates are held on by adhesive.
figUrE a
2) remove the 2 screws holding the 2 parts of the hr grip together (Figure C).
3) Separate the 2 parts of the hr grip and remove them from the frame (Figure D).
figUrE c
4) reverse Steps 1-3 to install new hr grips.
cHaptEr 7: part rEplacEMEnt gUiDE
figUrE b
figUrE D
31