Crank Arm Replacement - Vision Fitness X20 Service Manual

cHaptEr 7: part rEplacEMEnt gUiDE

7.9 cranK arM rEplacEMEnt

1) remove the 2 screws holding on the front pedal arm covers and remove them (Figures A & B). NOTE: the pedal arm top and bottom
covers are snapped together and will need to be pulled apart.
2) remove the bolt / nut holding the pedal arm to the crank (Figure C).
figUrE a figUrE b figUrE c
3) Use a flat screwdriver to remove the crank arm cover (Figures D & e).
figUrE D
figUrE E
40