Grounding Instructions; Assembly; Moving - Vision Fitness S7200HRT Owner's Manual

GROUNDING INSTRUCTIONS

If your elliptical has power incline with a 3-prong plug, you must follow these
grounding instructions.
This product must be grounded. If a elliptical should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce the risk of
electrical shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
WARNING
Connect this exercise product to a properly grounded outlet only. Never operate
product with a damaged cord or plug even if it is working properly. Never operate
any product if it appears damaged, or has been immersed in water.
This product is for use on a
nominal 110-120 Volt circuit
and has a grounding plug
that looks like the plug in the
illustration. Make sure that
the product is connected to
an outlet having the same
configuration as the plug.
No adapter should be used
with this product.
This product must be used on a dedicated circuit. To determine if you are on a
dedicated circuit, shut off the power to that circuit and observe if any other devices
6
lose power. If so, move devices to a different circuit. Note: There are usually multiple
outlets on one circuit. This elliptical should be used with a minimum 15-amp circuit.
Note: There are usually multiple outlets on one circuit. This elliptical should be used
with a minimum 15-amp circuit.
3-POLE GROUNDED
GROUNDED POWER
OUTLET CORD

ASSEMBLY

It is recommended, when possible, that an authorized VISION FITNESS retailer
assemble your Suspension Elliptical Trainer. If you have elected to assemble this
product yourself, for your safety, please read and follow each of the steps in the
enclosed assembly instructions. If you have any questions regarding any component
or function of your Suspension Elliptical Trainer, contact your retailer.

MOVING

VISION FITNESS
Your Suspension Elliptical Trainer has transport wheels included
for ease of mobility. To move, firmly grasp the rear of the frame assembly. Carefully lift
and roll on the transport wheels.
CAUTION:
Our Suspension Elliptical Trainers are well-built and heavy, weighing up to
340 pounds! Use care and additional help if necessary.
7