Roller Replacement - Vision Fitness X20 Service Manual

7.8 rollEr rEplacEMEnt

1) remove the pedal arm as outlined in Section 7.7.
2) remove the 2 screws holding the roller cover to the pedal arm (Figures A & B).
figUrE a
3) remove the screw holding the roller to the pedal arm (Figure C).
4) the roller can now be removed (Figure D).
figUrE c
5) reverse Steps 1-4 to install a new roller. NOTE: there is a wavy washer between the roller and the pedal arm, be sure this get re-installed.
cHaptEr 7: part rEplacEMEnt gUiDE
figUrE b
figUrE D
39