Chapter 2: Important Safety Instructions; Before Getting Started - Vision Fitness X20 Service Manual

cHaptEr 2: iMportant SafEty inStrUctionS

2.1 bEforE gEtting StartED

to ensure your safety and protect the equipment, read all
instructions before operating the elliptical trainer.
ChooSInG A SIte
the site should be well lit and well ventilated. locate the Vision
Fitness X20 or X30 elliptical trainer on a structurally solid and
flat surface. the elliptical trainer should have a clearance of 20"
on one side and behind the unit, and 12" on the other side from
the wall or other equipment. this zone is to allow easy access
to the elliptical trainer and gives the user an easy exit path from
the machine. If the site has a heavy plush carpet, to protect the
carpeting and machinery, you should place a rigid plastic base under
the unit.
Please do not place the Vision Fitness X20 or X30 elliptical trainer
in an area of high humidity, such as the vicinity of a steam room,
indoor pool, or sauna. exposure to intensive water vapor or chlorine
could adversely affect the electronics, as well as other parts of the
machine.
2
MoVInG the ellIPtICAl trAIner
Your Vision Fitness X20 & X30 elliptical trainers have transport
wheels included for ease of mobility. to move your elliptical trainer,
firmly grasp the rear of the frame assembly. Carefully lift and roll on
the transport wheels.
CAUtIon:
Vision Fitness elliptical trainers are well built and heavy, use care
and additional help if necessary. this elliptical trainer can weigh
up to 200 lbs.