Testing The Elliptical Trainer - Vision Fitness X20 Service Manual

cHaptEr 7: part rEplacEMEnt gUiDE

7.17 tESting tHE Elliptical trainEr

onCe the UnIt or rePlACeMent PArt IS FUllY InStAlleD AnD ASSeMBleD AnD
ProPerlY PlACeD on the Floor, USe the FollowInG InStrUCtIonS to teSt
the MAChIne:
1) without hitting start or entering any program modes, stand on the elliptical trainer and hold the handlebars while pedaling to simulate
exercising. while moving, listen for any odd noises or squeaks.
2) After stopping movement, press the StArt button and begin pedaling.
3) Grasp the hand grips to check for proper heart rate response.
4) Press the level up and down buttons on the console to make sure resistance is fully functional.
5) If everything functions properly, stop pedaling and the unit will reset to normal operation within 30 seconds.
51