cHaptEr 7: part rEplacEMEnt gUiDE
7.12 SiDE coVEr rEplacEMEnt - continUED
8) repeat Step 7 on the opposite side cover.
9) If the right side cover needs to be replaced, remove the nut holding the power receptacle to the front of the side cover and remove the
receptacle (Figures e & F).
figUrE E
figUrE f
10) Both side covers can now be removed (Figure G).
11) reverse Steps 1-10 to install a new side cover. NOTE: If just removing the side covers, the logo may leave residue on the side covers
when removed. Be sure to use alcohol, Goo Gone, or some other adhesive removal product to clean the side cover before installing the new
logo.
figUrE g
45