Vision Fitness X20 Service Manual page 58

cHaptEr 8: Elliptical trainEr SpEcificationS anD aSSEMbly gUiDE
8.2 aSSEMbly inStrUctionS - continUED
HarDWarE Kit for StEp 2
inclUDES:
M8 x 25mm oval hex Socket Bolt - Qty 4
8.4 x 17 x 1.0t Arc washer - Qty 4
StEp 2
1) open the hardware for Step 2.
2) Attach the levelers to the stabilizer tube.
a. Screw both levelers into the holes in the front stabilizer tube.
3) Attach the front stabilizer tube to the front stabilizer bracket.
a. Attach the front stabilizer tube to the front stabilizer bracket using 4 bolts and 4 arc washers.
54