Engineering Mode - Premier Console - Vision Fitness X20 Service Manual

cHaptEr 5: EnginEEring MoDE

5.3 EnginEEring MoDE - prEMiEr conSolE

EntEring EnginEEring MoDE:
to enter engineering Mode on the Premier Console, press and hold
the SPeeD UP and SPeeD Down keys simultaneously for 3-5
seconds.
configUration ScrEEn:
From this screen you can adjust program defaults, check
accumulated time, change the language or change the unit of
measure.
Unit SElEction:
to change the unit of measure select MI or KM and check to see if
your desired unit of measure is displayed under UnItS and select
BACK to return to the previous screen.
SEtting prograM DEfaUltS:
to set program defaults select the setting you would like to change,
make the necessary change and select BACK to return to the
previous screen. Continue selecting BACk to return to the main
user engineering screen.
SEtting DatE / tiME:
Select DAte / tIMe when in the ConFIGUrAtIon screen. Select
the information that needs to be changed (YeAr, Month, DAY,
hoUr, MInUte, SeConD) and use the arrow keys to modify.
Select SAVe when the date and time are set and BACK to return to
the ConFIGUrAtIon screen.
21