Safety Instructions - Vision Fitness S7100 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using
followed, including the following:
Read all instructions before using this exercise product.
wARNINg!
• Use this exercise product for its intended use as described in this Owner's
Guide. Only use attachments recommended by the manufacturer.
• Never drop or insert any object into any opening.
• Do not remove the Suspension Elliptical™ Trainer sidecovers. Service should be
performed only by an authorized VISION FITNESS retailer.
• Never operate this Suspension Elliptical™ Trainer if it has a damaged cord
or plug, if it is not working properly, or if it has been damaged or immersed
in water. Please contact your authorized VISION FITNESS retailer for service.
• Keep the cord away from heated surfaces.
• Do not use the Suspension Elliptical™ Trainer in any location that is not
temperature controlled, such as, but not limited to garages, porches, pool rooms,
bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• To disconnect, turn the switch on the front of the unit to the OFF position, then
remove plug from outlet.
• Only use the power cord provided with your VISION FITNESS
Suspension Elliptical™ Trainer.
• Never place the power cord under carpeting or place any object on
top of the power cord that may pinch and damage it.
• Unplug your Suspension Elliptical™ Trainer when not in use, before cleaning, and
before moving it.
• This Suspension Elliptical™ Trainer should not be used by persons weighing more
than 300 pounds. Failure to comply will void the warranty.
• Unplug Suspension Elliptical™ Trainer before moving or cleaning it. To clean,
wipe surfaces down with soap and slightly damp cloth only; never use solvents.
(See MAINTENANCE)
• Keep the topside of the foot support clean and dry.
• Do not turn pedals by hand.
• This Suspension Elliptical™ Trainer is intended for in-home use only. Do not use
this Suspension Elliptical™ Trainer in any commercial, rental, school or institutional
4
setting. Failure to comply will void the warranty.
• Disconnect all power before servicing the equipment.
an electrical product,
To reduce the risk of burns, fire, electrical shock or injury to
persons:
basic precautions should always be