7.5 linK arM rEplacEMEnt
1) remove the bolt / nut holding the handlebar to the link arm (Figure A).
2) remove the screw holding the link arm to the pedal arm (Figure B).
figUrE a
3) remove the link arm (Figure C).
4) reverse Steps 1-3 to install a new link arm. NOTE: Be sure to re-install the teflon washers between the link arm and the handlebar (Figure
D).
figUrE c
cHaptEr 7: part rEplacEMEnt gUiDE
figUrE b
figUrE D
35