Wsw16 (Function Setting 1) - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW16 (Function setting 1)

Selector
No.
1 Not used.
ITU-T (CCITT) superfine
2
recommendation
3–6 Not used.
7 Max. document length limitation
Stop/Exit key pressed during
8
reception
NOTE: Selector 7 is applicable to models equipped with ADF units.
Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT)
recommended superfine mode (15.4 lines/mm). If it is set to "0," it communicates in
native superfine mode.
Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
Selector 8: Stop key pressed during reception
If this selector is set to "1," pressing the Stop/Exit key can stop the current
receiving operation. The received data will be lost.
G157
CÓPIA NÃO CONTROLADA
Function
5-58
CÓPIA NÃO CONTROLADA
Setting and Specifications
0: OFF 1: ON
0: 400 cm 1: 90 cm
0: Not functional 1: Functional
SM