Wsw50 (Sdaa Settings); Wsw51 (Function Setting 16); Wsw52 Selector - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW50 (SDAA settings)

Selector
No.
Percentage voltage for
interpreting the external
1, 2 telephone as being hooked up
(based on the network's standard
voltage)
DC mask curve table to be
3 applied when the line is
connected
AC impedance to be applied
4
when the line is connected
Current control to be applied
5, 6 immediately after connection of
the line
AC voltage threshold for
7, 8
detection of ring
NOTE: WSW50 is applicable to models equipped with SDAA circuits.

WSW51 (Function setting 16)

Selector
No.
Output of communications error
1 report when transmission
verification report is disabled
2–8 Not used.

WSW52 Selector

Selector
No.
1–8 Not used.
G157
CÓPIA NÃO CONTROLADA
Function
Function
Function
5-88
CÓPIA NÃO CONTROLADA
Setting and Specifications
(Not used.)
(Not used.)
(Not used.)
(Not used.)
(Not used.)
Setting and Specifications
0: Enable 1: Disable
Setting and Specifications
SM