Wsw04 (Transfer Facility Setting) - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW04 (TRANSFER facility setting)

Selector
No.
1 Earth function in transfer facility
Dual tone detection frequency in
2, 3
ICM recording
Dual tone detection sensitivity in
4
ICM recording
Earth time length for earth
5, 6
function
Break time length for flash
7, 8
function
NOTE: 1) Selectors 1 and 5 through 8 are not applicable in those countries where
no transfer facility is supported.
2) Selectors 2 through 4 are applicable to models equipped with built-in
TADs.
Selector 1: Earth function in transfer facility (Not used.)
This selector determines whether or not the earth function is added to the transfer
setting menu to be accessed by the function switch.
Selectors 2 and 3: Dual tone detection frequency in ICM recording
If the machine detects either of the frequencies set by these selectors in ICM
recording, it disconnects the line. For example, if these selectors are set to "0, 0,"
the machine disconnects the line upon detection of 350 Hz or 440 Hz.
Selector 4: Dual tone detection sensitivity in ICM recording
Setting this selector to "1" increases the tone detection sensitivity in ICM recording.
Selectors 5 and 6: Earth time length for earth function (Not used.)
These selectors set the short-circuiting time length of the telephone line (La or Lb)
to ground. This setting is effective only when the earth function is selected for the R
key by using the function switch.
Selectors 7 and 8: Break time length for flash function
These selectors set the break time length.
G157
CÓPIA NÃO CONTROLADA
Function
5-44
CÓPIA NÃO CONTROLADA
Setting and Specifications
(Not used.)
No. 2. 3.
0 0: 350 and 440 Hz
0 1: 440 and 480 Hz
1 0: 480 and 620 Hz
1 1: 480 and 620 Hz
0: Normal 1: High
No. 5. 6.
0 0: 200 ms
0 1: 300 ms
1 0: 500 ms
1 1: 700 ms
No. 7. 8.
0 0: 80 ms
0 1: 110 ms
1 0: 250 ms
1 1: 500 ms
SM