Maintenance Mode Functions - Ricoh G157 Service Manual

5.2.2 MAINTENANCE MODE FUNCTIONS

Function
Mode No.
01 EEPROM Parameter Initialization
05 Printout of Scanning Compensation Data
06 Placement of CIS Unit Position for Transportation
08 ADF Performance Test
09 Test Pattern 1
10 Firmware Switch Setting
11 Printout of Firmware Switch Data
12 Operational Check of the LCD
13 Operational Check of the Operation Panel PCB
32 Sensor Operational Check
52
EEPROM Customizing
(Entering the country code for Europe/Asia.)
53 Received Data Transfer Function
54 Fine Adjustment of Scan Start/End Positions
55 Acquisition of White Level Data and CIS Scanner
Area Setting
67 Paper Feed and Ejection Test
74 EEPROM Customizing
(Direct entering of the four-digit code.)
80 Display of the Equipment's Log Information
82 Machine Error Code Indication
87 Output of Transmission Log to the Telephone Line
91 EEPROM Parameter Initialization
99 Exit from the Maintenance Mode
– Cancellation of the Memory Security Mode
NOTE: The shaded functions can be accessed by users.
SM
CÓPIA NÃO CONTROLADA
Function
5-21
CÓPIA NÃO CONTROLADA
MAINTENANCE MODE
Note
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
User accessible
G157