Display Of The Equipment's Log Information (Function Mode 80) - Ricoh G157 Service Manual

MAINTENANCE MODE

Display of the Equipment's Log Information (Function mode 80)

This displays the machine's log information on the LCD.
1. Enter the "Maintenance" mode.
2. Press the "8" and "0" keys in this order.
3. The USB serial number appears on the LCD.
4. Press the "Black Start" key. Each time the "Black Start" key is pressed, one of
the following log information items appears on the LCD in the order given
below.
1) USB serial number
2) Page count, indicating how many pages the OPC drum has printed.
3) Total page count, indicating how many pages the machine has printed
since it was produced.
4) Toner change count, indicating how many times toner has been replaced.
5) Copy page count, indicating how many copies have been made.
6) PC print page count, indicating how many pages the machine has printed
as an output device for a PC.
7) Fax page count, indicating how many received fax pages have been
printed.
8) ADF jam count, indicating how many times a document jam has occurred.
9) ADF page count, indicating how many documents have been fed.
10) Error code of the most recent machine error
11) Error code of the most recent communications error
5. To stop this operation and return the machine to the initial display of the
maintenance mode, press the "Stop/Exit" key.
NOTE: 1) If you press the "Menu/Set" key while a "MACHINE ERR" error code is
displayed, the last error code is displayed. Each time the "Menu/Set" key
is pressed, up to the ten most recent error codes are displayed one by
one in reverse order.
2) If you press the "Menu/Set" key while a "COMEER1" error is displayed,
the last error, the previous error, and the second previous error are
displayed in turn. The indication changes from "COMEER1",
"COMEER2", to "COMEER3".
G157
CÓPIA NÃO CONTROLADA
5-36
CÓPIA NÃO CONTROLADA
NOTE: 1)
NOTE: 2)
SM