Code 37 Media Manage; Code 38 Extend Media - Ricoh G157 Service Manual

Code 37 MEDIA MANAGE

Signals from the OHP sensor can be ignored if the sensor is giving incorrect
readings. However, this mode should not be used under normal circumstances.
1. Select "MEDIA MANAGE/EX" using the "Scroll" key.
2. Press the "Select" key.
3. Select "DEFIANCE" using the "Scroll" key, and then
press the "Select" key if the OHP sensor signal
should be ignored.
NOTE: For normal operation, the mode is
automatically preset to "MANAGE".
4. The display automatically returns to "SERVICE
MODE".

Code 38 EXTEND MEDIA

The paper type can be specified.
1. Select "MEDIA MANAGE/EX" using the "Scroll" key.
2. Press the "Select" key.
3. Select the desired media using the "Scroll" key, and
then press the "Select" key.
4. Select the desired sub-type using the "Scroll" key.
PPC (plain paper): Normal or Thin
MTS (labels or medium-thick stock): Normal or
Glossy
TS (thick stock):
5. Press the "Clear" key to return to the "SERVICE
MODE".
SM
CÓPIA NÃO CONTROLADA
TS1 or TS2
5-9
CÓPIA NÃO CONTROLADA
SERVICE MODE MENU
SERVICE MODE
MEDIA MANAGE/EX
37 MEDIA MANAGE
MANAGE DEFIANCE
SERVICE MODE
TEST PRINT/NEXT
SERVICE MODE
EXTEND MEDIA/FA
38 EXTEND MEDIA
PPC / MTS / TS
38 EXTEND PPC
Normal / Thin
SERVICE MODE
TEST PRINT/NEXT
G157