3.17 REGISTRATION
3.17.1 LEADING EDGE REGISTRATION
Service mode 43 "MARGIN ADJUST: TOP"
(
5.1.2 SERVICE MODE FUNCTIONS) adjusts
the margin on the leading edge. The top margin
gets wider when you set a greater value.
You can specify the values from –4.9 to +4.9.
The margin changes by 0.7 mm when the value increases or decreases by 1 in the
SP. For example:
when you specify "+5," the margin changes by +3.5 mm;
when you specify "–4," the margin changes by –2.8 mm.
NOTE: Default depends on the adjustment in the factory.
3.17.2 SIDE-TO-SIDE REGISTRATION
Service mode 43 "MARGIN Adjust: LEFT, LEFT1
(
5.1.2 SERVICE MODE FUNCTIONS) adjusts
the margin on the left edge. The left margin gets
wider when you seta greater value. Specify the
value for each tray and the duplex unit:
• Margin Adjust: Left
• Margin Adjust: Left1
NOTE: Default depends on the adjustment in the factory.
SM
CÓPIA NÃO CONTROLADA
Tray 1 (Standard paper tray)
Tray 2 (Optional paper feed unit)
3-45
CÓPIA NÃO CONTROLADA
REGISTRATION
Default
NOTE 2)
Maximum
+4.9 mm
Minimum
–4.9 mm
Step
0.7 mm
Tray 1
NOTE 2)
Default
Tray 2
Maximum
Minimum
Step
±0.0 mm
+3.5 mm
–3.5mm
0.5 mm
G157