Code 39 Factory Mode; Code 43 Margin Adjust - Ricoh G157 Service Manual

SERVICE MODE MENU

Code 39 FACTORY MODE

This mode contains nine programs to check machine operation and to perform the
resetting functions that are necessary for maintenance.
FACTORY MODE
43
44
45
46
39
47
48
49
50
51

Code 43 MARGIN ADJUST

The position of the top margin and the left margin can be checked and adjusted.
1. Select "MARGIN ADJUST" in the "FACTORY
MODE" using the "Scroll" key.
2. Press the "Select" key.
3. Select either TOP or LEFT/ LEFT1 using the "Scroll"
key, and then press the "Select" key.
TOP: Top margin
LEFT: Left margin, standard tray
LEFT1: Left margin, optional tray
4. Select the amount of the adjustment by picking a
displayed number with the "Scroll" key.
NOTE: Top margin adjustment: The margin can be
adjusted between - 4.9 mm and +4.9 mm of
the reference value "0". Each number on the
bottom line of the LCD represents an
adjustment of 0.7 mm. (For example, -4
means -2.8 mm)
Left margin adjustment: The margin can be
adjusted between – 3.5 mm and +3.5 mm of
the reference value "0". The unit of
adjustment is 0.5 mm.
5. Press the Select key to set the adjustment.
6. Press the "Clear" key to terminate the "MARGIN
ADJUST" mode.
7. Press the "Clear" key one more time to return to
"FACTORY MODE".
G157
CÓPIA NÃO CONTROLADA
MARGIN ADJUST
LIFE PERIOD SET DFU
NVRAM TUNE UP
NVRAM INITIAL
TOTAL PAGE SET
EACH IMAGE SET
NEXT LIFE SET
ID DATA SET DFU
OPT TUNE UP DFU
5-10
CÓPIA NÃO CONTROLADA
39 FACTORY MODE
MARGIN ADJUST/L
43 MARGIN ADJUST
TOP /LEFT /LEFT1
43 TOP –2.8mm
– < 765 32101 > +
43 TOP +3.5mm
– < 101234 67 > +
43 MARGIN ADJUST
TOP /LEFT /LEFT1
39 FACTORY MODE
MARGIN ADJUST/L
SM