Bottom Base And Rear Cover - Ricoh G157 Service Manual

EXTERIOR COVER

1.1.2 BOTTOM BASE AND REAR COVER

1. Remove the printer from the
paper tray unit.
2. Tray
3. Three screws on the bottom
base [A]
NOTE: Do not remove the
stud shafts [C] at this
time. If you remove
the stud shafts, the
bottom base becomes
loose. The edges of
the bottom base can
scratch and damage
the bottom areas of
the left and right covers.
4. Top cover ( 1.1.1)
5. Clutch assembly (
6. Ground plate [B] ( x 1)
7. Stud shafts [C]
G389
CÓPIA NÃO CONTROLADA
G389R911.WMF
1.4)
2
CÓPIA NÃO CONTROLADA
[A]
[B]
[C]
G389R910.WMF
SM