Config Load - THOMSON 516 Reference Manual

config load

Load complete saved (backup) or default configuration file.
SYNTAX:
config load [load_ip = <{no | yes}>]
[defaults = <{yes | no}>]
[flush = <{yes | no}>]
[echo = <{no | yes}>]
[filename = <string>]
where:
load_ip Load IP settings (yes) or not (no).
Note
Not keeping the IP settings could cause lost IP connectivity in the LAN.
defaults Load default configuration (yes) or saved configuration (no).
Note
If this parameter is not specified, the saved configuration will be loaded.
flush Flush the current configuration before loading a new configuration (yes) or not (no).
Note
It is advisable to flush the current configuration before loading the new
configuration.
echo Echo each command string when loaded (yes) or not (no).
filename Configuration filename.
EXAMPLE:
=>ip rtlist
Destination Source
10.0.0.0/24 10.0.0.0/24
172.16.0.5/32 0.0.0.0/0
10.0.0.140/32 0.0.0.0/0
127.0.0.1/32 0.0.0.0/0
172.16.0.0/24 0.0.0.0/0
=>config flush flush_ip=no
=>ip rtlist
Destination Source
10.0.0.0/24 10.0.0.0/24
10.0.0.140/32 0.0.0.0/0
127.0.0.1/32 0.0.0.0/0
=>config load flush=yes
=>ip rtlist
Destination Source
10.0.0.0/24 10.0.0.0/24
10.0.0.140/32 0.0.0.0/0
172.16.0.5/32 0.0.0.0/0
127.0.0.1/32 0.0.0.0/0
172.16.0.0/24 0.0.0.0/0
=>
RELATED COMMANDS:
config erase
config flush
config save
E-DOC-CTC-20040907-0010 v1.0
Gateway
10.0.0.140
172.16.0.5
10.0.0.140
127.0.0.1
172.16.0.5
Gateway
10.0.0.140
10.0.0.140
127.0.0.1
Gateway
10.0.0.140
10.0.0.140
172.16.0.5
127.0.0.1
172.16.0.5
Erase a user configuration file.
Flush the complete current configuration.
Save the current configuration
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
Intf Mtrc
eth0 0
eth0 0
cip1 0
loop 0
cip1 1
Config Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
73