Cip Commands - THOMSON 516 Reference Manual

CIP Commands

Introduction
This chapter describes the commands of the cip command group.
Contents
This chapter covers the following commands:
cip flush Flush complete Classical IP over ATM (IP oA) configuration.
cip ifadd Create a Classical IP oA interface at the local side of the Logical IP Subnet (LIS).
cip ifdelete Delete a Classical IP oA interface at the local side of the LIS.
cip iflist Show current Classical IP oA configuration.
cip pvcadd Create a PVC Address Resolution Protocol (ARP) entry.
cip pvcdelete Delete a PVC ARP entry.
cip pvclist Show current PVC ARP entries.
E-DOC-CTC-20040907-0010 v1.0
CIP Commands
60
61
62
63
64
65
66
59