PPPoA Commands
pppoa rtdelete
Delete the route specification for a PPPoA link.
SYNTAX:
pppoa rtdelete
where:
intf
The PPPoA interface name for which to delete the route settings.
EXAMPLE:
=>pppoa iflist
pppoa: dest : pppoa
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
auth = auto
admin state = up
LCP : state = starting
IPCP: state = initial
=>pppoa rtdelete intf=pppoa1
=>pppoa iflist
pppoa_pppoa: dest : pppoa
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
auth = auto
admin state = up
LCP : state = starting
IPCP: state = initial
=>
RELATED COMMANDS:
pppoa rtadd
284
intf = <intfname>
[00:00:00]
QoS default
encaps VC-MUX
trans addr = pat
mru = 1500
user = johndoe@ISP
password = ********
oper state = down
retransm = 1
retransm = 0
[00:00:00]
QoS default
encaps VC-MUX
trans addr = pat
mru = 1500
user = johndoe@ISP
password = ********
oper state = down
retransm = 1
retransm = 0
Automatically add a route configuration to the routing table.
link state = not-connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
REQUIRED
E-DOC-CTC-20040907-0010 v1.0