Direct Ftp Access - THOMSON 516 Reference Manual

Direct FTP Access

The SpeedTouch TM File System
TM
The SpeedTouch permanent storage, further referred to as 'file system', exists of nonvolatile memory used for
storing, retrieving and maintaining the SpeedTouch
default settings files.
The file system of the SpeedTouch
allows to transfer the SpeedTouch
Proceed as indicated in the example below to open an FTP session to the SpeedTouch
/home/doejohn{1}$ftp 10.0.0.138
Connected to 10.0.0.138
220 Inactivity timer = 120 seconds. Use 'site idle <secs>' to change.
Name (10.0.0.138:doejohn):
TM
331 SpeedTouch (00-90-D0-01-02-03) User 'doejohn' OK. Password required.
Password : ######
330 OK
ftp>
SpeedTouch TM File System Structure
The files system features a tiny multilevel directory structure with a single root node called
nodes called active and dl.
The root contains:
all the necessary files for the SpeedTouch
the active subdirectory always contains the software image in execution, in other words the active software
image.
the dl directory contains the dormant software image (in other words, the passive software image). If you
have made changes to the SpeedTouch
web pages or via the Setup wizard), a user.ini Service Template file is created in the
In other words, after each :saveall or :config save all, the user.ini Service Template file present in the
dl subdirectory reflects the current configuration of the SpeedTouch
SpeedTouch TM File System Access Rights
From the root directory, you can access the
!
No read/write permission is granted for the
The following access rights apply for the subdirectories:
for the active subdirectory:
Listing of active
FTP (m)get of (multiple)
for the dl subdirectory:
Listing of dl subdirectory files (dir)
FTP (m)get of (multiple)
FTP (m)put of (multiple)
FTP (m)delete of (multiple)
E-DOC-CTC-20040907-0010 v1.0
TM
TM
is accessible via the File Transfer Protocol (FTP) transport protocol. This
TM
software image(s) and/or Service Template files and default settings files.
TM
to boot correctly.
TM
configuration and saved them (be it via a Telnet session, via the
active and
root
subdirectory files (dir)
active subdirectory files
dl subdirectory files
dl subdirectory files
dl subdirectory files.
software image(s), Service Template files and optionally
TM
.
dl subdirectories.
directory.
CLI Navigation
TM
file system:
root and two leaf
dl subdirectory.
27