Dhcp Server Pool Config - THOMSON 516 Reference Manual

Multi-user adsl gateways
Hide thumbs Also See for 516:
Table of Contents

Advertisement

dhcp server pool config

Configure an existing DHCP server pool.
SYNTAX:
dhcp server pool config
where:
name
The name of the DHCP server pool to configure.
index
A number between 0 (highest priority) and the highest number (lowest priority)
found in the list of existing DHCP server pools.
Represents a (higher) priority for the DHCP server pool.
intf
The interface for which the pool is allowed to lease IP addresses.
poolstart
The lowest IP address in the DHCP address range to use for leasing. Default value
of this parameter is 0.0.0.0 (not specified), which means that the lowest IP address
of the pool will be defined by the remote server via Internet Protocol Control
Protocol (IPCP) as soon as the Point-to-Point Protocol (PPP) IPCP subnetmasking
connection is established.
poolend
The highest IP address in the DHCP address range to use for leasing. Default
value of this parameter is 0.0.0.0 (not specified), which means that the highest IP
address of the pool will be defined by the remote server via IPCP as soon as the
PPP IPCP subnetmasking connection is established.
netmask
The applicable netmask for the DHCP leases.
gateway
The IP address of the default gateway for the DHCP clients.
Default value of this parameter is 0 (not specified), which means that the gateway
IP address will be communicated by the remote server as soon as the PPP IPCP
subnetmasking connection is established or that the SpeedTouch
LAN default gateway.
server
The IP address of the DHCP server for DHCP clients.
E-DOC-CTC-20040907-0010 v1.0
name = <string>
[index = <number>]
[intf = <string>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[gateway = <ipaddress | 0>]
[server = <ipaddress | 0>]
[primdns = <ipaddress | 0>]
[secdns = <ipaddress | 0>]
[dnsmetric = <number{0-100}>]
[primwins = <ipaddress | 0>]
[secwins = <ipaddress | 0>]
[leasetime = <number>]
[unnumbered = <{no | yes}>]
[localgw = <{off | on}>]
DHCP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
TM
acts as the
OPTIONAL
109

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speedtouch 530v5Speedtouch 510v5536546Speedtouch 516Speedtouch 536 ... Show all

Table of Contents