Pppoe Rtdelete - THOMSON 516 Reference Manual

pppoe rtdelete

Delete the route specification for a PPPoE link.
Use the command :pppoe ifdetach for this interface prior to deleting route configurations.
SYNTAX:
pppoe rtdelete intf = <string>
where:
intf The PPPoE interface name for which to delete the route settings.
EXAMPLE:
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
auth = auto user = johndoe
admin state = down
LCP : state = initial
IPCP: state = initial
acname : --- service : ---
=>pppoe rtdelete intf=myPPPoE
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe
admin state = down
LCP : state = initial
IPCP: state = initial
acname : --- service : ---
=>
RELATED COMMANDS:
pppoe rtadd
E-DOC-CTC-20040907-0010 v1.0
[00:00:00]
password = ********
oper state = down link state = not-connected
retransm = 9 term. reason = User kill
retransm = 0 term. reason =
[00:00:00]
password = ********
oper state = down link state = not-connected
retransm = 9 term. reason = User kill
retransm = 0 term. reason =
Automatically add a route configuration to the routing table.
PPPoE Commands
REQUIRED
299